9 Volt FM Transmitter Kit by BC338

This new 9 Volt FM Transmitter Kit can transmit over 900 feet in the open depending on aerial used. The tank oscillator coil is built into the circuit board, and has been tinkered with to give the best distance and stability for it's size. The battery supply rails have been well tied together with respect to radio frequencies. The tracks are also thicker making the fm transmitter circuit a single �solid� block eliminating RF currents in different parts of the circuit. This also means the battery no longer has RF on it which makes the whole unit a lot more frequency stable. Can be tuned anywhere in FM band - DIY Kit 18.

Specifications:

* L: 1-3/4" W: 7/8" H: 1/2"
* Requires 9 Volt Battery
* Transmission frequency is user selectable.
* Transmitter can be listened to on any FM radio.

Read More Source: ( Or Buy kit)
http://www.electronickits.com/kit/complete/surv/ck217.htm
Thank you

FM Transmitter 4W by 2N3553

This is a small but quite powerful FM transmitter having three RF stages incorporating an audio preamplifier for better modulation. t has an output power of 4 Watts and works off 12-18 VDC which makes it easily portable. It is the ideal project for the beginner who wishes to get started in the fascinating world of FM broadcasting and wants a good basic circuit to experiment with.

Technical Specifications - Characteristics

Modulation type: ........ FM
Frequency range: .... 88-108 MHz
Working voltage: ..... 12-18 VDC
Maximum current: ....... 450 mA
Output power: ............ 4 W

Parts List

R1 = 220K
R2 = 4,7K
R3 = R4 = 10K
R5 = 82 Ohm
R = 150Ohm 1/2W x2 *
VR1 = 22K trimmer

C1 = C2 = 4,7uF 25V electrolytic
C3 = C13 = 4,7nF ceramic
C4 = C14 = 1nF ceramic
C5 = C6 = 470pF ceramic
C7 = 11pF ceramic
C8 = 3-10pF trimmer
C9 = C12 = 7-35pF trimmer
C10 = C11 = 10-60pF trimmer
C15 = 4-20pF trimmer
C16 = 22nF ceramic *

L1 = 4 turns of silver coated wire at 5,5mm diameter
L2 = 6 turns of silver coated wire at 5,5mm diameter
L3 = 3 turns of silver coated wire at 5,5mm diameter
L4 = printed on PCB
L5 = 5 turns of silver coated wire at 7,5mm diameter

RFC1=RFC2=RFC3= VK200 RFC tsok

TR1 = TR2 = 2N2219 NPN
TR3 = 2N3553 NPN
TR4 = BC547/BC548 NPN
D1 = 1N4148 diode *
MIC = crystalic microphone

Read More Source : smartkit